×

74LVC16245ADL

16-bit bus transceiver with direction pin; 5 V tolerant; 3-state

74LVC16245A;74LVCH16245A是16位收发器,在发送和接收方向上都具有非反相3态总线兼容输出。该器件具有两个可实现轻松级联的输出使能(nOE)和两个可实现方向控制的发送/接收(nDIR)。nOE控制输出,因此总线可以得到有效隔离。该器件可用作两个8位收发器或一个16位收发器。

输入可通过3.3 V或5 V器件进行驱动。禁用时,可以向输出施加高达5.5 V的电压。这些特性允许将这些器件用于混合3.3 V和5 V应用。

74LVCH16245A数据输入上的总线保持无需使用外部上拉电阻来保持未使用的输入。

该产品已停产。参见单击此处了解停产信息和替代产品。

Features and benefits

  • 5 V容压输入/输出,可实现与5 V逻辑的接合
  • 1.2 V至3.6 V的宽电源电压范围
  • CMOS低功耗
  • MULTIBYTE直通式标准针脚排列架构
  • 多个低电感电源和接地针脚,可实现最低噪声和地弹
  • 具有TTL电平的直接接口
  • VCC = 0 V时的高阻抗
  • 所有数据输入都具有总线保持(仅74LVCH16245A)
  • 符合JEDEC标准:
    • JESD8-7A(1.65 V至1.95 V)
    • JESD8-5A(2.3 V至2.7 V)
    • JESD8-C/JESD36(2.7 V至3.6 V)
  • ESD保护:
    • HBM JESD22-A114F超过2000 V
    • MM JESD22-A115-B超过200 V
    • CDM JESD22-C101E超过1000 V
  • 额定温度范围为-40 °C至+85 °C和-40 °C至+125 °C

参数类型

型号 Product status Package name
74LVC16245ADL End of life SSOP48

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74LVC16245ADL 74LVC16245ADL,112
(935234900112)
Obsolete LVC16245A LVC16245A Standard Procedure Standard Procedure no package information
74LVC16245ADL,118
(935234900118)
Obsolete LVC16245A LVC16245A Standard Procedure Standard Procedure

环境信息

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74LVC16245ADL 74LVC16245ADL,112 74LVC16245ADL rohs rhf rhf
74LVC16245ADL 74LVC16245ADL,118 74LVC16245ADL rohs rhf rhf
品质及可靠性免责声明

文档 (3)

文件名称 标题 类型 日期
74LVC_LVCH16245A 16-bit bus transceiver with direction pin; 5 V tolerant; 3-state Data sheet 2023-08-01
AN11009 Pin FMEA for LVC family Application note 2019-01-09
lvc16245a lvc16245a IBIS model IBIS model 2013-04-07

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
lvc16245a lvc16245a IBIS model IBIS model 2013-04-07

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.