×

74LVCH245ADB

Octal bus transceiver; 3-state

74LVC245A;74LVCH245A是8位收发器,在发送和接收方向上都具有非反相3态总线兼容输出。该器件具有一个可实现轻松级联的输出使能(OE)输入和一个可实现方向控制的发送/接收(DIR)。OE控制输出,因此总线可以得到有效隔离。

输入可通过3.3 V或5 V器件进行驱动。禁用时,可以向输出施加高达5.5 V的电压。这些特性允许将这些器件用于混合3.3 V和5 V应用。

74LVCH245A数据输入上的总线保持无需使用外部上拉电阻来保持未使用的输入。

该产品已停产。参见单击此处了解停产信息和替代产品。

Features and benefits

  • 5 V容压输入/输出,可实现与5 V逻辑的接合
  • 1.2 V至3.6 V的宽电源电压范围
  • CMOS低功耗
  • 具有TTL电平的直接接口
  • 输入可接受高达5.5 V的电压
  • VCC = 0 V时的高阻抗
  • 所有数据输入上的总线保持(仅74LVCH245A)
  • 符合JEDEC标准:
    • JESD8-7A(1.65 V至1.95 V)
    • JESD8-5A(2.3 V至2.7 V)
    • JESD8-C/JESD36(2.7 V至3.6 V)
  • ESD保护:
    • HBM JESD22-A114F超过2000 V
    • MM JESD22-A115B超过200 V
    • CDM JESD22-C101E超过1000 V
  • 额定温度范围为-40 °C至+85 °C和-40 °C至+125 °C

参数类型

型号 Product status Package name
74LVCH245ADB End of life SSOP20

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74LVCH245ADB 74LVCH245ADB,112
(935211560112)
Obsolete no package information
74LVCH245ADB,118
(935211560118)
Obsolete

环境信息

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74LVCH245ADB 74LVCH245ADB,112 74LVCH245ADB rohs rhf rhf
74LVCH245ADB 74LVCH245ADB,118 74LVCH245ADB rohs rhf rhf
品质及可靠性免责声明

文档 (5)

文件名称 标题 类型 日期
74LVC_LVCH245A Octal bus transceiver; 3-state Data sheet 2023-08-08
AN11009 Pin FMEA for LVC family Application note 2019-01-09
AN263 Power considerations when using CMOS and BiCMOS logic devices Application note 2023-02-07
lvch245a lvch245a IBIS model IBIS model 2013-04-07
lvc lvc Spice model SPICE model 2013-05-07

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
lvch245a lvch245a IBIS model IBIS model 2013-04-07
lvc lvc Spice model SPICE model 2013-05-07

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.