×

74LV08DB

Quad 2-input AND gate

74LV08是低压硅栅CMOS器件,与74HC08与74HCT08针脚和功能兼容。

74LV08提供四路2输入与功能。

该产品已停产。参见单击此处了解停产信息和替代产品。

Features and benefits

  • 宽工作电压范围:1.0 V至5.5 V
  • 最适合低压应用:1.0 V至3.6 V
  • 接受介于VCC = 2.7 V和VCC = 3.6 V之间的TTL输入电平
  • VCC = 3.3 V且Tamb = 25 °C时的典型输出地弹:< 0.8 V
  • VCC = 3.3 V且Tamb = 25 °C时的典型高电平输出电压(VOH)欠冲:> 2 V
  • ESD保护:
    • HBM JESD22-A114E超过2000 V
    • MM JESD22-A115-A超过200 V
  • 多种封装选择
  • 额定温度范围为-40 °C至+85 °C和-40 °C至+125 °C

参数类型

型号 Product status Package name
74LV08DB End of life SSOP14

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74LV08DB 74LV08DB,118
(935169270118)
Withdrawn / End-of-life LV08 SOT337-1
SSOP14
(SOT337-1)
SOT337-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
SOT337-1_118
74LV08DB,112
(935169270112)
Obsolete LV08 Not available

环境信息

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74LV08DB 74LV08DB,118 74LV08DB rohs rhf rhf
74LV08DB 74LV08DB,112 74LV08DB rohs rhf rhf
品质及可靠性免责声明

文档 (7)

文件名称 标题 类型 日期
74LV08 Quad 2-input AND gate Data sheet 2024-01-30
74lv08 74lv08 IBIS model IBIS model 2016-05-24
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SSOP14_SOT337-1_mk plastic, shrink small outline package; 14 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body Marcom graphics 2017-01-28
SOT337-1 plastic, shrink small outline package; 14 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body Package information 2020-04-21
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
74lv08 74lv08 IBIS model IBIS model 2016-05-24

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.