Nexperia
Or cross multiple parts
×

CBT3384D

10-bit bus switch with 5-bit output enables

The CBT3384 is a dual 5-pole, single-throw bus switch. The device features two output enable inputs (nOE) that each control five switch channels. The switches are disabled when the associated nOE input is HIGH. This device is fully specified for partial power down applications using IOFF.

此产品已停产

Features and benefits

  • 5 Ω switch connection between two ports

  • Direct interface with TTL levels

  • Overvoltage tolerant control inputs to 5.5 V

  • IOFF circuitry provides partial Power-down mode operation

  • Latch-up protection exceeds 100 mA per JESD78

  • ESD protection:

    • HBM JESD22-A114E exceeds 2000 V

    • CDM JESD22-C101C exceeds 1000 V

  • Specified from -40 °C to +85 °C

参数类型

型号 Product status VCC (V) VPASS (V) Logic switching levels RON (Ω) f(-3dB) (MHz) Nr of bits tpd (ns) Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Package name
CBT3384D End of life 4.5 - 5.5 3.9 TTL 7 300 10 0.25 very low -40~85 77 25.0 SO24

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
CBT3384D CBT3384D,112
(935269089112)		 Obsolete no package information
CBT3384D,118
(935269089118)		 Obsolete

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
CBT3384D CBT3384D,112 CBT3384D rohs rhf rhf
CBT3384D CBT3384D,118 CBT3384D rohs rhf rhf
品质及可靠性免责声明

Series

文档 (3)

文件名称 标题 类型 日期
CBT3384 10-bit bus switch with 5-bit output enables Data sheet 2023-11-13
AN90010 Pin FMEA for CBT(D) family Application note 2019-10-28
CBT3384D_Nexperia_Product_Reliability CBT3384D Nexperia Product Reliability Quality document 2022-05-04

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册