Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74HCT153DB
Dual 4-input multiplexer
74HC153;74HCT153是双路4输入多路复用器。该器件具有独立的使能输入(nE)和公共数据选择输入(S0和S1)。对于每个多路复用器,选择输入选择四个二进制输入之一并将其路由到多路复用器输出(nY)。E上的高电平将对应的多路复用器输出强制为低电平。输入包括钳位二极管。其能使用限流电阻将输入连接到高于VCC的电压。
Alternatives
Features and benefits
- 输入电平:
- 对于74HC153:CMOS电平
- 对于74HCT153:TTL电平
- 非反相输出
- 针对每个输出的单独使能输入
- 一般穿选输入
- 符合JEDEC标准no. 7A
- 允许从n个线路到1个线路的多路复用
- 提供使能线路以实现级联(n个线路到1个线路)
- ESD保护:
- HBM JESD22-A114F超过2000 V
- MM JESD22-A115-A超过200 V
- 多种封装选择
- 额定温度范围为-40 °C到+85 °C和-40 °C到+125 °C
参数类型
型号 | Product status | Package name |
---|---|---|
74HCT153DB | End of life | SSOP16 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74HCT153DB | 74HCT153DB,112 (935189230112) |
Obsolete | HCT153 |
SSOP16 (SOT338-1) |
SOT338-1 |
SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE |
Not available |
74HCT153DB,118 (935189230118) |
Obsolete | HCT153 | Not available |
环境信息
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号 | 化学成分 | RoHS | RHF指示符 |
---|---|---|---|---|
74HCT153DB | 74HCT153DB,112 | 74HCT153DB | ||
74HCT153DB | 74HCT153DB,118 | 74HCT153DB |
Series
文档 (8)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
AN11044 | Pin FMEA 74HC/74HCT family | Application note | 2019-01-09 |
Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
SSOP16_SOT338-1_mk | plastic, shrink small outline package; 16 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body | Marcom graphics | 2017-01-28 |
SSOP-TSSOP-VSO-REFLOW | Footprint for reflow soldering | Reflow soldering | 2009-10-08 |
HCT_USER_GUIDE | HC/T User Guide | User manual | 1997-10-31 |
SSOP-TSSOP-VSO-WAVE | Footprint for wave soldering | Wave soldering | 2009-10-08 |
支持
如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。
模型
No documents available
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.