Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74ALVT16373DL
16-bit transparent D-type latch; 3-state
74ALVT16373是高性能BiCMOS产品,设计用于2.5V或3.3V的VCC操作,I/O兼容性高达5V。
该器件是带非反相3态总线兼容输出的16位透明D型锁存器。该器件可用作两个8位锁存器或一个16位锁存器。锁存使能(LE)输入为高电平时,Q输出跟随数据(D)输入。锁存使能变为低电平时,Q输出会在从高电平跃迁至低电平前的一个设置时间被锁存为D输入处的电平。
Alternatives
Features and benefits
- 16位透明锁存器
- 兼容5V I/O
- 3态缓冲器
- 输出能力:+64mA/-32mA
- TTL输入和输出切换电平
- 5V电源系统的输入和输出接口能力
- 总线保持数据输入无需使用外部上拉电阻来保持未使用的输入
- 允许带电插拔
- 上电复位
- 上电3态
- 输出连接到5V总线时无总线电流负载
- 闭锁保护超过500mA,符合JEDEC Std 17标准
- ESD保护根据MIL STD 883方法3015超过2000V,根据机器模型则超过200V
参数类型
型号 | Product status | Package name |
---|---|---|
74ALVT16373DL | End of life | SSOP48 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74ALVT16373DL | 74ALVT16373DL,112 (935209580112) |
Withdrawn / End-of-life | ALVT16373 |
SSOP48 (SOT370-1) |
SOT370-1 |
SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE |
Not available |
74ALVT16373DL,118 (935209580118) |
Obsolete | ALVT16373 | SOT370-1_118 |
环境信息
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号 | 化学成分 | RoHS | RHF指示符 |
---|---|---|---|---|
74ALVT16373DL | 74ALVT16373DL,112 | 74ALVT16373DL | ||
74ALVT16373DL | 74ALVT16373DL,118 | 74ALVT16373DL |
Series
文档 (6)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
alvt16373 | alvt16373 IBIS model | IBIS model | 2013-04-07 |
Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
SOT370-1 | plastic, shrink small outline package; 48 leads; 0.635 mm pitch; 15.9 mm x 7.5 mm x 2.8 mm body | Package information | 2020-04-21 |
SSOP-TSSOP-VSO-REFLOW | Footprint for reflow soldering | Reflow soldering | 2009-10-08 |
alvt16 | alvt16 Spice model | SPICE model | 2013-05-06 |
SSOP-TSSOP-VSO-WAVE | Footprint for wave soldering | Wave soldering | 2009-10-08 |
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.