×

74AUP1Z04-Q100

Low-power X-tal driver with enable and internal resistor

The 74AUP1Z04-Q100 is a crystal driver with enable and internal resistor. When not in use the EN input can be driven HIGH, putting the device in a low power disable mode with X1 pulled HIGH via RPU, X2 set LOW and Y set HIGH. Schmitt trigger action on the EN input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

特性

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

  • Wide supply voltage range from 0.8 V to 3.6 V

  • CMOS low power dissipation

  • High noise immunity

  • Overvoltage tolerant inputs to 3.6 V

  • Low noise overshoot and undershoot < 10 % of VCC

  • IOFF circuitry provides partial Power-down mode operation at output Y

  • Latch-up performance exceeds 100 mA per JESD78B Class II

  • Complies with JEDEC standards:

    • JESD8-12 (0.8 V to 1.3 V)
    • JESD8-11 (0.9 V to 1.65 V)
    • JESD8-7 (1.65 V to 1.95 V)
    • JESD8-5 (2.3 V to 2.7 V)
    • JESD8C (2.7 V to 3.6 V)
  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 3A exceeds 5000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

参数类型

Type numberProduct statusVCC (V)Logic switching levelsOutput drive capability (mA)fmax (MHz)Nr of bitsPower dissipation considerationsTamb (°C)Rth(j-a) (K/W)Rth(j-c) (K/W)Package name
74AUP1Z04GW-Q100Production0.8 - 3.6CMOS± 1.9701ultra low-40~125264153TSSOP6

封装

型号封装尺寸版本回流焊/波峰焊包装状态标示可订购的器件编号,(订购码(12NC))
74AUP1Z04GW-Q100
TSSOP6
(SOT363-2)
SOT363-2SOT363-2_125Activea474AUP1Z04GW-Q100H
( 9356 911 14125 )

环境信息

型号可订购的器件编号化学成分RoHSRHF指示符无铅转换日期
74AUP1Z04GW-Q10074AUP1Z04GW-Q100H74AUP1Z04GW-Q100
品质及可靠性免责声明

文档 (2)

文件名称标题类型日期
74AUP1Z04_Q100Low-power X-tal driver with enable and internal resistorData sheet2023-07-18
SOT363-2plastic thin shrink small outline package; 6 leads; body width 1.25 mmPackage information2022-11-21

支持

如果您需要设计/技术支持,请告知我们并填写 应答表, 我们会尽快回复您。

订购、定价与供货

样品

安世半导体客户可通过我们的销售机构或直接通过在线样品商店订购样品: https://extranet.nexperia.com.

样品订单通常需要2-4天寄送时间。

如果您尚未取得安世半导体的直接采购帐号,我们的全球与区域经销网络可以协助您取得样品。