×

74HC4016PW

Quad single-pole single-throw analog switch

The 74HC/1 are high-speed Si-gate CMOS devices and are pin compatible with the '4016' of the '4000B' series. They are specified in compliance with JEDEC standard no. 7A.

The 74HC/HCT4016 have four independent analog switches (transmission gates).

Each switch has two input/output terminals (Yn, Zn) and an active HIGH enable input (En ). When En is connected to VCC, a low bidirectional path between Yn and Zn is established (ON condition). When En is connected to ground (GND), the switch is disabled and a high impedance between Yn and Zn is established (OFF condition).

Current through a switch will not cause additional VCC current provided the voltage at the terminals of the switch is maintained within the supply voltage range; VCC>> (VY,VZ) >> GND. Inputs Yn and Zn are electrically equivalent terminals.

该产品已停产。参见单击此处了解停产信息和替代产品。

Features and benefits

  • Low 'ON' resistance:

    160 Ω (typ.) at VCC = 4.5 V

    120 Ω (typ.) at VCC = 6.0 V

    80 Ω (typ.) at VCC = 9.0 V

  • Individual switch controls
  • Typical 'break before make' built in
  • Output capability: non-standard
  • ICC category: SSI

参数类型

型号 Product status Configuration VCC (V) Logic switching levels RON (Ω) RON(FLAT) (Ω) f(-3dB) (MHz) THD (%) Xtalk (dB) Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
74HC4016PW End of life SPST-NO 2.0 - 10.0 CMOS 300 80 160 0.4 -60 very low -40~125 124 2.1 48.1 TSSOP14

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74HC4016PW 74HC4016PW,118
(935174910118)
Withdrawn / End-of-life HC4016 SOT402-1
TSSOP14
(SOT402-1)
SOT402-1 SSOP-TSSOP-VSO-WAVE
SOT402-1_118
74HC4016PW,112
(935174910112)
Obsolete HC4016 Not available

环境信息

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74HC4016PW 74HC4016PW,118 74HC4016PW rohs rhf rhf
74HC4016PW 74HC4016PW,112 74HC4016PW rohs rhf rhf
品质及可靠性免责声明

文档 (9)

文件名称 标题 类型 日期
74HC4016 Quad single-pole single-throw analog switch Data sheet 2017-03-17
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
SOT402-1 3D model for products with SOT402-1 package Design support 2023-02-02
SOT402 3D model for products with SOT402 package Design support 2020-01-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
TSSOP14_SOT402-1_mk plastic, thin shrink small outline package; 14 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm body Marcom graphics 2017-01-28
SOT402-1 plastic, thin shrink small outline package; 14 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.2 mm body Package information 2023-11-07
HCT_USER_GUIDE HC/T User Guide User manual 1997-10-31
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
SOT402-1 3D model for products with SOT402-1 package Design support 2023-02-02
SOT402 3D model for products with SOT402 package Design support 2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.