Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74LVC14ADB
Hex inverting Schmitt trigger with 5 V tolerant input
74LVC14A提供六个带施密特触发器输入的反相缓冲器。该器件能够将缓慢变化的输入信号转换成清晰无抖动的输出信号。
输入针对正向和负向信号在不同点进行切换。正电压VT+和负电压VT-之差定义为输入迟滞电压VH.
输入可通过3.3 V或5 V器件进行驱动。该特性允许将该器件用作混合3.3 V和5 V应用中的转换器。
Alternatives
Features and benefits
- 1.2 V至3.6 V的宽电源电压范围
- 5 V容压输入,可实现与5 V逻辑的接合
- CMOS低功耗
- 具有TTL电平的直接接口
- 无限输入上升和下降时间
- 输入可接受高达5.5 V的电压
- 符合JEDEC标准JESD8-C/JESD36(2.7 V至3.6 V)
- ESD保护:
- HBM JESD22-A114F超过2000 V
- MM JESD22-A115-B超过200 V
- CDM JESD22-C101E超过1000 V
- 多种封装选择
- 额定温度范围为-40 °C至+85 °C和-40 °C至+125 °C
Applications
- 适用于高噪声环境的波形和脉冲整形器
- 非稳态多谐振荡器
- 单稳态多谐振荡器
参数类型
型号 | Product status | Package name |
---|---|---|
74LVC14ADB | End of life | SSOP14 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74LVC14ADB | 74LVC14ADB,112 (935260738112) |
Obsolete | LVC14A LVC14A Standard Procedure Standard Procedure | no package information | |||
74LVC14ADB,118 (935260738118) |
Obsolete | LVC14A LVC14A Standard Procedure Standard Procedure |
环境信息
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号 | 化学成分 | RoHS | RHF指示符 |
---|---|---|---|---|
74LVC14ADB | 74LVC14ADB,112 | 74LVC14ADB | ||
74LVC14ADB | 74LVC14ADB,118 | 74LVC14ADB |
文档 (5)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
74LVC14A | Hex inverting Schmitt trigger with 5 V tolerant input | Data sheet | 2024-02-13 |
AN11009 | Pin FMEA for LVC family | Application note | 2019-01-09 |
AN263 | Power considerations when using CMOS and BiCMOS logic devices | Application note | 2023-02-07 |
lvc14a | lvc14a IBIS model | IBIS model | 2021-02-02 |
lvc | lvc Spice model | SPICE model | 2013-05-07 |
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.