×

74LVT16245BDL

3.3 V 16-bit transceiver; 3-state

74LVT16245B;74LVTH16245B是高性能BiCMOS产品,设计用于3.3 V的VCC操作。

该器件是16位收发器,在发送和接收方向上都具有非反相3态总线兼容输出。控制功能实施可最大限度减少外部定时要求。该器件具有一个可实现轻松级联的输出使能(nOE)输入和一个可实现直接控制的直接 (nDIR)输入。

该产品已停产。参见单击此处了解停产信息和替代产品。

Features and benefits

  • 16位双向总线接口
  • 3态缓冲器
  • 输出能力:+64 mA和−32 mA
  • TTL输入和输出切换电平
  • 5 V电源系统的输入和输出接口能力
  • 总线保持数据输入无需使用外部上拉电阻来保持未使用的输入
  • 允许带电插拔
  • 上电3态
  • 输出连接到5 V总线时无总线电流负载
  • 闭锁保护:
    • JESD78B II类超过500 mA
  • ESD保护:
    • HBM JESD22-A114F超过2000 V
    • MM JESD22-A115-A超过200 V

参数类型

型号 Product status Package name
74LVT16245BDL End of life SSOP48

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74LVT16245BDL 74LVT16245BDL,112
(935179190112)
Withdrawn / End-of-life LVT16245B SOT370-1
SSOP48
(SOT370-1)
SOT370-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Not available
74LVT16245BDL,118
(935179190118)
Withdrawn / End-of-life LVT16245B SOT370-1_118

环境信息

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74LVT16245BDL 74LVT16245BDL,112 74LVT16245BDL rohs rhf rhf
74LVT16245BDL 74LVT16245BDL,118 74LVT16245BDL rohs rhf rhf
品质及可靠性免责声明

文档 (6)

文件名称 标题 类型 日期
74LVT_LVTH16245B 3.3 V 16-bit transceiver; 3-state Data sheet 2024-03-25
lvt16245b lvt16245b IBIS model IBIS model 2013-04-07
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT370-1 plastic, shrink small outline package; 48 leads; 0.635 mm pitch; 15.9 mm x 7.5 mm x 2.8 mm body Package information 2020-04-21
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
lvt16245b lvt16245b IBIS model IBIS model 2013-04-07

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.