Nexperia
Or cross multiple parts
×

CBT3306GM

Dual bus switch

The CBT3306 dual FET bus switch features independent line switches. Each switch is disabled when the associated output enable (nOE) input is HIGH.

此产品已停产

Alternatives

Features and benefits

  • 5 Ω switch connection between two ports

  • Direct interface with TTL levels

  • Overvoltage tolerant control inputs to 5.5 V

  • IOFF circuitry provides partial Power-down mode operation

  • Latch-up protection exceeds 100 mA per JESD78B

  • ESD protection:

    • HBM JESD22-A114F exceeds 2000 V

    • CDM JESD22-C101D exceeds 1000 V

  • Specified from -40 °C to +85 °C

参数类型

型号 Product status Package name
CBT3306GM End of life XQFN8

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
CBT3306GM CBT3306GM,125
(935290812125)		 Obsolete F06 SOT902-2
XQFN8
(SOT902-2) 		SOT902-2 SOT902-2_125

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
CBT3306GM CBT3306GM,125 CBT3306GM rohs rhf rhf
品质及可靠性免责声明

Series

文档 (6)

文件名称 标题 类型 日期
AN90010 Pin FMEA for CBT(D) family Application note 2019-10-28
Nexperia_document_guide_MiniLogic_MicroPak_201808 MicroPak leadless logic portfolio guide Brochure 2018-09-03
cbt3306 cbt3306 IBIS model IBIS model 2013-04-07
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
XQFN8_SOT902-2_mk plastic, extremely thin quad flat package; 8 terminals; 0.55 mm pitch; 1.6 mm x 1.6 mm x 0.5 mm body Marcom graphics 2017-01-28
SOT902-2 plastic, leadless extremely thin quad flat package; 8 terminals; 0.5 mm pitch; 1.6 mm x 1.6 mm x 0.5 mm body Package information 2020-04-21

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
cbt3306 cbt3306 IBIS model IBIS model 2013-04-07

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册