×

74HCT597DB

8-bit shift register with input flip-flops

74HC/HCT597是高速硅栅CMOS器件,与低功耗肖特基TTL (LSTTL)针脚兼容。该类器件的规格符合JEDEC标准no. 7A。

74HC/HCT597由将数据馈入并行输入串行输出8位移位寄存器的每个8位存储寄存器组成。存储寄存器和移位寄存器都具有正沿触发的时钟。移位寄存器还具有直接负载(来自存储)和清零输入。

该产品已停产。参见单击此处了解停产信息和替代产品。

Features and benefits

  • 8位并行存储寄存器输入
  • 移位寄存器具有直接覆盖负载和清零
  • 输出能力:标准
  • ICC类别:MSI

Applications

  • 串行到并行数据转换
  • 遥控保持寄存器

参数类型

型号 Product status Package name
74HCT597DB End of life SSOP16

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74HCT597DB 74HCT597DB,118
(935190180118)
Discontinued / End-of-life HCT597 SOT338-1
SSOP16
(SOT338-1)
SOT338-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Not available
74HCT597DB,112
(935190180112)
Obsolete HCT597 Not available

环境信息

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74HCT597DB 74HCT597DB,118 74HCT597DB rohs rhf rhf
74HCT597DB 74HCT597DB,112 74HCT597DB rohs rhf rhf
品质及可靠性免责声明

文档 (8)

文件名称 标题 类型 日期
74HC_HCT597 8-bit shift register with input flip-flops Data sheet 2024-03-21
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SSOP16_SOT338-1_mk plastic, shrink small outline package; 16 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body Marcom graphics 2017-01-28
SOT338-1 plastic, shrink small outline package; 16 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body Package information 2022-06-20
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
HCT_USER_GUIDE HC/T User Guide User manual 1997-10-31
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.