Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74ALVT162821DL
20-bit bus interface D-type flip-flop; positive-edge trigger with 30 Ohm termination resistors; 3-state
74ALVT162821高性能BiCMOS器件结合了低静态和动态功耗以及高速和高输出驱动能力。它设计用于I/O 兼容性高达5 V、在2.5 V或3.3 V电压下进行VCC操作。
74ALVT162821具有两个10位边沿触发寄存器,每个寄存器都耦合到一个三态输出缓冲器。每个寄存器的两个部分由时钟(nCP)和输出使能(nOE)控制逻辑门独立控制。
每个寄存器为完全边沿触发。在时钟从低到高转换前的某个建立时间,每个D输入的状态会被传输到相应的触发器Q输出。
三态输出缓冲器设计用于驱动重负载三态总线、MOS存储器或MOS微处理器。有源低电平输出使能(nOE)可控制所有十个不受寄存器操作影响的三态缓冲器。nOE为低电平时,寄存器内的数据会出现在输出处。nOE为高电平时,输出处于高阻抗“关断”状态,这表示这些输出既不能驱动也不能加载总线。
74ALVT162821设计在高电平或低电平输出级内使用30 Ω串联电阻。该设计可降低存储器地址驱动器、时钟驱动器以及总线接收器/发送器等应用中的线路噪声。该系列端接电阻可降低过冲和欠冲,非常适用于驱动存储器阵列。
Features and benefits
- 输出包括30 Ω的串联电阻,从而无需外部端接电阻
- 20位正沿触发寄存器
- 可兼容5 V I/O
- 多个Vcc引脚和GND引脚可最大程度降低开关噪声
- 允许带电插拔
- 上电复位
- 上电三态
- 输出能力:+12mA/-12mA
- 根据Jedec Std 17 ,锁存保护超过500mA
- 根据MIL STD 883 Method 3015,ESD保护超过2000 V;根据机器模型,ESD保护超过200V
- 总线保持数据输入无需用外部上拉电阻来保持闲置输入
参数类型
型号 | Product status | Package name |
---|---|---|
74ALVT162821DL | End of life | SSOP56 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74ALVT162821DL | 74ALVT162821DL,112 (935255450112) |
Obsolete | ALVT162821 |
SSOP56 (SOT371-1) |
SOT371-1 |
SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE |
Not available |
74ALVT162821DL,118 (935255450118) |
Obsolete | ALVT162821 | Not available | ||||
74ALVT162821DL,512 (935255450512) |
Obsolete | ALVT162821 | Not available | ||||
74ALVT162821DL,518 (935255450518) |
Obsolete | ALVT162821 | Not available |
环境信息
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
Series
文档 (6)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
alvt162821 | alvt162821 IBIS model | IBIS model | 2013-04-07 |
Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
SOT371-1 | plastic, shrink small outline package; 56 leads; 0.635 mm pitch; 18.45 mm x 7.5 mm x 2.8 mm body | Package information | 2020-04-21 |
SSOP-TSSOP-VSO-REFLOW | Footprint for reflow soldering | Reflow soldering | 2009-10-08 |
alvt16 | alvt16 Spice model | SPICE model | 2013-05-06 |
SSOP-TSSOP-VSO-WAVE | Footprint for wave soldering | Wave soldering | 2009-10-08 |
支持
如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。
模型
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
alvt162821 | alvt162821 IBIS model | IBIS model | 2013-04-07 |
alvt16 | alvt16 Spice model | SPICE model | 2013-05-06 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.