×

HEF40373BT

Octal transparent latch with 3-state outputs

The HEF40373B is an 8-bit transparent latch with 3-state buffered outputs. The output stages have high current output capability suitable for driving highly capacitive loads. The latch outputs follow the data inputs when the latch enable (E) is HIGH. When E is LOW, the data that meets the set-up times is latched. The 3-state outputs are controlled by the output enable input EO. A HIGH on EO causes the outputs to assume a high impedance OFF-state. The device features hysteresis on the E input to improve noise rejection. Schmitt-trigger action in the E input makes the circuit highly tolerant to slower input rise and fall times.

此产品已停产

Features and benefits

  • Octal bus interface

  • 3-state buffers

  • Fully static operation

  • 5 V, 10 V, and 15 V parametric ratings

  • Standardized symmetrical output characteristics

  • Specified from −40 °C to +85 °C

参数类型

型号 Product status VCC (V) Logic switching levels Output drive capability (mA) tpd (ns) Nr of bits Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
HEF40373BT End of life 4.5 - 15 CMOS -50/+62 40 8 medium -40~85 76 18.7 52 SO20

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
HEF40373BT HEF40373BT,652
(933638700652)
Obsolete no package information
HEF40373BT,653
(933638700653)
Obsolete

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
HEF40373BT HEF40373BT,652 HEF40373BT rohs rhf rhf
HEF40373BT HEF40373BT,653 HEF40373BT rohs rhf rhf
品质及可靠性免责声明

文档 (3)

文件名称 标题 类型 日期
HEF40373B Octal transparent latch with 3-state outputs Data sheet 2018-07-04
AN11051 Pin FMEA HEF4000 family Application note 2019-01-09
familyhef4000specification HEF/HEC4000B family specification overview Other type 2012-05-23

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.