74AVC16245-Q100

16-bit transceiver with direction pin; 3.6 V tolerant; 3-state

The 74AVC16245-Q100 is a 16-bit transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The device features two output enable inputs (nOE) for easy cascading and two send/receive inputs (nDIR) for direction control. Inputs nOE control the outputs so that the buses are effectively isolated. This device can be used as two 8-bit transceivers or one 16-bit transceiver.

The 74AVC16245-Q100 is designed to have an extremely fast propagation delay and a minimum amount of power consumption.

To ensure the high-impedance output state during power-up or power-down, tie pins nOE to V_CC through a pull-up resistor (Live Insertion).

A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 3) and is suitable for use in automotive applications.

特性

Automotive product qualification in accordance with AEC-Q100 (Grade 3)
- Specified from -40 °C to +85 °C
Wide supply voltage range from 1.2 V to 3.6 V
Complies with JEDEC standards:
- JESD8-7 (1.2 V to 1.95 V)
- JESD8-5 (1.8 V to 2.7 V)
- JESD8-1A (2.7 V to 3.6 V)
ESD protection:
- MIL-STD-883, method 3015 exceeds 1000 V
- HBM JESD22-A114F exceeds 1000 V
- MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)
CMOS low power consumption
Input/output tolerant up to 3.6 V
Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
Low inductance multiple VCC and GND pins to minimize noise and ground bounce
Supports Live Insertion

文档 (4)

文件名称	标题	类型	日期
74AVC16245_Q100	16-bit transceiver with direction pin; 3.6 V tolerant; 3-state	Data sheet	2017-03-30
AN90007	Pin FMEA for AVC family	Application note	2018-11-30
avc16245	74AVC16245 IBIS model	IBIS model	2019-01-09
Nexperia_Selection_guide_2023	Nexperia Selection Guide 2023	Selection guide	2023-05-10

支持

如果您需要设计/技术支持，请告知我们并填写应答表, 我们会尽快回复您。

模型

文件名称	标题	类型	日期
avc16245	74AVC16245 IBIS model	IBIS model	2019-01-09