Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more informationAlternatives
Features and benefits
- 1.2至3.6 V的宽电源电压范围
- 输入可接受高达5.5 V的电压
- CMOS低功耗
- 具有TTL电平的直接接口
- 符合JEDEC标准:
- JESD8-7A(1.65 V至1.95 V)
- JESD8-5A(2.3 V至2.7 V)
- JESD8-C/JESD36(2.7 V至3.6 V)
- ESD保护:
- HBM JESD22-A114F超过2000 V
- MM JESD22-A115-B超过200 V
- CDM JESD22-C101E超过1000 V
- 额定温度范围为-40 °C至+85 °C和-40 °C至+125 °C
参数类型
型号 | Product status | Package name |
---|---|---|
74LVC11DB | End of life | SSOP14 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74LVC11DB | 74LVC11DB,112 (935205920112) |
Obsolete | LVC11 |
SSOP14 (SOT337-1) |
SOT337-1 |
SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE |
Not available |
74LVC11DB,118 (935205920118) |
Obsolete | LVC11 | SOT337-1_118 |
文档 (10)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
74LVC11 | Triple 3-input AND gate | Data sheet | 2024-02-12 |
AN11009 | Pin FMEA for LVC family | Application note | 2019-01-09 |
AN263 | Power considerations when using CMOS and BiCMOS logic devices | Application note | 2023-02-07 |
lvc11 | lvc11 IBIS model | IBIS model | 2013-04-07 |
Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
SSOP14_SOT337-1_mk | plastic, shrink small outline package; 14 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body | Marcom graphics | 2017-01-28 |
SOT337-1 | plastic, shrink small outline package; 14 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body | Package information | 2020-04-21 |
SSOP-TSSOP-VSO-REFLOW | Footprint for reflow soldering | Reflow soldering | 2009-10-08 |
lvc | lvc Spice model | SPICE model | 2013-05-07 |
SSOP-TSSOP-VSO-WAVE | Footprint for wave soldering | Wave soldering | 2009-10-08 |
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.