×

74LVC00ADB

Quad 2-input NAND gate

74LVC00A提供四个2输入与非门。

所有输入处的施密特触发器动作使电路容许较慢的输入上升和下降时间。

输入可通过3.3 V或5 V器件进行驱动。该特性允许将这些器件用作混合3.3 V和5 V应用中的转换器。

该产品已停产。参见单击此处了解停产信息和替代产品。

Features and benefits

  • 与5 V逻辑接合的5 V容压输入
  • 1.2 V至3.6 V的宽电源电压范围
  • CMOS低功耗
  • 具有TTL电平的直接接口
  • 符合JEDEC标准:
    • JESD8-7A(1.65 V至1.95 V)
    • JESD8-5A(2.3 V至2.7 V)
    • JESD8-C/JESD36(2.7 V至3.6 V)
  • ESD保护:
    • HBM JESD22-A114F超过2000 V
    • MM JESD22-A115-B超过200 V
    • CDM JESD22-C101E超过1000 V
  • 额定温度范围为-40 °C至+85 °C和-40 °C至+125 °C

参数类型

型号 Product status Package name
74LVC00ADB End of life SSOP14

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74LVC00ADB 74LVC00ADB,112
(935249970112)
Obsolete LVC00A SOT337-1
SSOP14
(SOT337-1)
SOT337-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
Not available
74LVC00ADB,118
(935249970118)
Obsolete LVC00A SOT337-1_118

环境信息

下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74LVC00ADB 74LVC00ADB,112 74LVC00ADB rohs rhf rhf
74LVC00ADB 74LVC00ADB,118 74LVC00ADB rohs rhf rhf
品质及可靠性免责声明

文档 (10)

文件名称 标题 类型 日期
74LVC00A Quad 2-input NAND gate Data sheet 2024-02-08
AN11009 Pin FMEA for LVC family Application note 2019-01-09
AN263 Power considerations when using CMOS and BiCMOS logic devices Application note 2023-02-07
lvc00a lvc00a IBIS model IBIS model 2013-04-07
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SSOP14_SOT337-1_mk plastic, shrink small outline package; 14 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body Marcom graphics 2017-01-28
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
lvc00a lvc00a IBIS model IBIS model 2013-04-07

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.