双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

SiC power devices

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)
NEX13120PC-Q100

NEX13120PC-Q100 Production

12-channel automotive linear LED driver

NEX13120-Q100 is an AEC-Q100 Grade 1 qualified 12-channel, 40 V high-side LED driver with up to 100 mA output current per channel, PWM and analog dimming support, and MTP for configurable depending on application requirements in automotive lighting systems.

NEX13120-Q100 supports 8-bit output current with high accuracy from channel to channel and device to device, and channels can be used in parallel to support higher current output than 100 mA. The low dropout of the device helps eliminate the heat generation of the device itself. The device integrates UART over CAN as the digital interface to enable long distance off-board communication, which is a typical scenario for automotive exterior lighting where different lamp functions are typically located in different PCB boards. NEX13120-Q100 also supports LED open-circuit, short-to-ground, and single-LED short-circuit diagnostics. Additionally, a configurable watchdog automatically sets the part into Fail-Safe states when the CAN bus connection is lost.

NEX13120-Q100 can operate at a junction temperature range from -40 °C to +150 °C in a thermally enhanced 24-pin HTSSOP24 package.

Figure 1. Typical application
  • 产品细节
  • 文档
  • 支持
  • 订购中
  • 交互式数据手册

产品细节

Features and benefits

  • AEC-Q100 qualified for automotive applications

    • Specified from -40 °C to 125 °C

  • Function safety capable

    • Provide documents to support function safety design

  • 12-channel precision high-side current output:

    • Vbat: 4.5 V to 40 V and Vs: 3.8 V to 40 V

    • Up to 100 mA channel current per channel

    • 2-bit global, 6-bit independent current setting

    • Current accuracy within ±5 % from 18 mA to 100 mA

    • Low voltage drops: 600 mV at 100 mA

    • 12-bit independent PWM dimming

    • Programmable PWM frequency: 50 Hz to 23.4 kHz

    • Linear and exponential dimming method

  • Integrated UART interface:

    • Data rate up to 2 Mbit/s

    • Supports UART data format

    • Supports 27 slave address set by resister

  • Diagnostics and protections:

    • Programmable Fail-Safe state

    • LED open-circuit detection

    • LED short-circuit detection

    • Single-LED short-circuit diagnostic

    • Programmable low-Vs detection

    • Open-drain FLT pin for fault indication

    • Watchdog and CRC for data line

    • MTP ECC check

    • 8-bit ADC for pin voltage measurement

    • Over-temperature protection

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C2a exceeds 500 V

Applications

  • Automotive exterior rear lights

  • Automotive exterior headlights

Register once, drag and drop ECAD models into your CAD tool and speed up your design.

More information

品质及可靠性免责声明

支持

如果您有支持方面的疑问，请告知我们。如需获得设计支持，请告知我们并填写技术支持表格，我们会尽快回复您。

请访问我们的社区论坛或联系我们。

Longevity

The Nexperia Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our Executive Management Team. View our longevity program here.

样品

作为 Nexperia 的客户，您可以通过我们的销售机构订购样品。

如果您没有 Nexperia 的直接账户，我们的全球和地区分销商网络可为您提供 Nexperia 样品支持。查看官方经销商列表。

交互式数据手册

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册