Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74LVC1G66GF
Bilateral switch
The 74LVC1G66 is a low-power, low-voltage Si-gate CMOS device.
The 74LVC1G66 provides one single pole, single-throw analog switch function. It has two input/output terminals (Yand Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.
Schmitt-trigger action at the enable input makes the circuit tolerant of slower input rise and fall times across the entire VCC range from 1.65 V to 5.5 V.
Alternatives
Features and benefits
- Wide supply voltage range from 1.65 V to 5.5 V
- Very low ON resistance:
- 7.5 Ω (typical) at VCC = 2.7 V
- 6.5 Ω (typical) at VCC = 3.3 V
- 6 Ω (typical) at VCC = 5 V
- Switch current capability of 32 mA
- High noise immunity
- CMOS low power consumption
- TTL interface compatibility at 3.3 V
- Latch-up performance meets requirements of JESD78 Class I
- ESD protection:
- HBM JESD22-A114E exceeds 2000 V
- MM JESD22-A115-A exceeds 200 V
- Enable input accepts voltages up to 5.5 V
- Multiple package options
- Specified from -40 Cel to +85 Cel and -40 Cel to +125 Cel
参数类型
型号 | Product status | Package name |
---|---|---|
74LVC1G66GF | End of life | XSON6 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74LVC1G66GF | 74LVC1G66GF,132 (935284307132) |
Obsolete | no package information |
Series
支持
如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。
模型
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
lvc1g66 | 74LVC1G66 IBIS model | IBIS model | 2015-02-19 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.