Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more informationIP4790CZ38
DisplayPort protection
The IP4790CZ38 is a single chip ElectroStatic Discharge (ESD) protection solution for the DisplayPort interfaces. The low capacitance, typically 0.7 pF to ground, supports the high data rates defined by the DisplayPort interface standard.
Features and benefits
- Robust ESD protection does not degrade even after several discharge incidents
- Low leakage, even after several hundred ESDs
- Very high ns diode switching speed and low line capacitance (0.7 pF to ground and 0.05 pF between channels) ensures signal integrity
- Integrated rail-to-rail clamping diodes with downstream ESD protection of +-8 kV according to IEC 61000-4-2, level 4 on all Main Link (ML) signal lines
- Matched 0.5 mm trace spacing
- Optimized TSSOP 38-pin package:
- Highly integrated
- Small footprint
- PCB-level
- RF-routing
- Lead (Pb) free
- Complies with Directive 2002/95/EC, Restriction of Hazardous Substances (RoHS)
Applications
The IP4790CZ38 can be used with a range of DisplayPort devices including:
- Personal computer
- PC monitor
- Notebook
封装
下表中的所有产品型号均已停产 。
| 型号 | 可订购的器件编号，（订购码(12NC)） | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
|---|---|---|---|---|---|---|---|
| IP4790CZ38 | IP4790CZ38/1,118 (934062168118) |
Obsolete | 4790/1 Diff.lot + Assy ID D*Dyyww (*=APC=P ; *=APB=n) | no package information | |||
环境信息
下表中的所有产品型号均已停产 。
| 型号 | 可订购的器件编号 | 化学成分 | RoHS | RHF指示符 |
|---|---|---|---|---|
| IP4790CZ38 | IP4790CZ38/1,118 | IP4790CZ38 |
|
|
文档
No documents available
Longevity
The Nexperia Longevity Program is aimed to provide our customers information from time to time about the expected time that our products can be ordered. The NLP is reviewed and updated regularly by our Executive Management Team. View our longevity program here.
模型
No documents available
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.