×

74HCT241DB

Octal buffer/line driver; 3-state

The 74HC241; 74HCT241 is an 8-bit buffer/line driver with 3-state outputs. The device can be used as two 4-bit buffers or one 8-bit buffer. The device features two output enables (1OE and 2OE), each controlling four of the 3-state outputs. A HIGH on 1OE or LOW on 2OE causes the associated outputs to assume a high-impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

The 74HCT241 device features reduced input threshold levels to allow interfacing to TTL logic levels.

此产品已停产

Features and benefits

  • Wide supply voltage range from 2.0 to 6.0 V

  • CMOS low power dissipation

  • High noise immunity

  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B

  • Input levels:

    • For 74HC241: CMOS level

    • For 74HCT241: TTL level

  • Octal bus interface

  • Non-inverting 3-state outputs

  • Complies with JEDEC standards

    • JESD8C (2.7 V to 3.6 V)

    • JESD7A (2.0 V to 6.0 V)

  • ESD protection:

    • HBM JESD22-A114F exceeds 2000 V

    • MM JESD22-A115-A exceeds 200 V

  • Specified from −40 °C to +85 °C and −40 °C to +125 °C

参数类型

型号 Product status Package name
74HCT241DB End of life SSOP20

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
74HCT241DB 74HCT241DB,112
(935182590112)
Obsolete HCT241 SOT339-1
SSOP20
(SOT339-1)
SOT339-1 SSOP-TSSOP-VSO-WAVE
Not available
74HCT241DB,118
(935182590118)
Obsolete HCT241 SOT339-1_118

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74HCT241DB 74HCT241DB,112 74HCT241DB rohs rhf rhf
74HCT241DB 74HCT241DB,118 74HCT241DB rohs rhf rhf
品质及可靠性免责声明

文档 (5)

文件名称 标题 类型 日期
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT339-1 plastic, shrink small outline package; 20 leads; 0.65 mm pitch; 7.2 mm x 5.3 mm x 2 mm body Package information 2020-04-21
HCT_USER_GUIDE HC/T User Guide User manual 1997-10-31
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

No documents available

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.