双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

74HC173; 74HCT173

Quad D-type flip-flop; positive-edge trigger; 3-state

The 74HC173; 74HCT173 is a quad positive-edge triggered D-type flip-flop. The device features clock (CP), master reset (MR), two input enable (E1, E2) and two output enable (OE1, OE2) inputs. When the input enables are LOW, the outputs Qn will assume the state of their corresponding Dn inputs that meet the set-up and hold time requirements on the LOW-to-HIGH clock (CP) transition. A HIGH on either input enable will cause the device to go into a hold mode, outputs hold their previous state independently of clock and data inputs. A HIGH on MR forces the outputs LOW independently of clock and data inputs. A HIGH on either output enable pin causes the outputs to assume a high-impedance OFF-state. Operation of the output enable inputs does not affect the state of the flip-flops. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

Features and benefits

  • Complies with JEDEC standard no. 7A

  • Input levels:

    • For 74HC173: CMOS level

    • For 74HCT173: TTL level

  • Gated input enable for hold (do nothing) mode

  • Gated output enable control mode

  • Edge-triggered D-type register

  • Asynchronous master reset

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

参数类型

型号 VCC (V) Logic switching levels Output drive capability (mA) tpd (ns) fmax (MHz) Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
74HC173D 2.0 - 6.0 CMOS ± 7.8 17 88 low -40~125 72 1 30 SO16
74HC173PW 2.0 - 6.0 CMOS ± 7.8 17 88 low -40~125 107 1 33.8 TSSOP16
74HCT173D 4.5 - 5.5 TTL ± 6 17 88 low -40~125 72 1 30 SO16

封装

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
74HC173D 74HC173D,653
(933714560653)		 Active 74HC173D SOT109-1
SO16
(SOT109-1) 		SOT109-1 SO-SOJ-REFLOW
SO-SOJ-WAVE
WAVE_BG-BD-1
暂无信息
74HC173PW 74HC173PW,118
(935189550118)		 Active HC173 SOT403-1
TSSOP16
(SOT403-1) 		SOT403-1 SSOP-TSSOP-VSO-WAVE
SOT403-1_118
74HCT173D 74HCT173D,653
(933715040653)		 Active 74HCT173D SOT109-1
SO16
(SOT109-1) 		SOT109-1 SO-SOJ-REFLOW
SO-SOJ-WAVE
WAVE_BG-BD-1
暂无信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
74HC173DB 74HC173DB,112
(935189250112)		 Obsolete HC173 SOT338-1
SSOP16
(SOT338-1) 		SOT338-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
暂无信息
74HC173DB,118
(935189250118)		 Obsolete HC173 暂无信息
74HCT173DB 74HCT173DB,112
(935189710112)		 Obsolete HCT173 SOT338-1
SSOP16
(SOT338-1) 		SOT338-1 SSOP-TSSOP-VSO-REFLOW
SSOP-TSSOP-VSO-WAVE
暂无信息
74HCT173DB,118
(935189710118)		 Obsolete HCT173 暂无信息

环境信息

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74HC173D 74HC173D,653 74HC173D rohs rhf rhf
74HC173PW 74HC173PW,118 74HC173PW rohs rhf rhf
74HCT173D 74HCT173D,653 74HCT173D rohs rhf rhf

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74HC173DB 74HC173DB,112 74HC173DB rohs rhf rhf
74HC173DB 74HC173DB,118 74HC173DB rohs rhf rhf
74HCT173DB 74HCT173DB,112 74HCT173DB rohs rhf rhf
74HCT173DB 74HCT173DB,118 74HCT173DB rohs rhf rhf
品质及可靠性免责声明

文档 (18)

文件名称 标题 类型 日期
74HC_HCT173 Quad D-type flip-flop; positive-edge trigger; 3-state Data sheet 2024-01-15
AN11044 Pin FMEA 74HC/74HCT family Application note 2019-01-09
AN90063 Questions about package outline drawings Application note 2025-06-13
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22
SOT403-1 3D model for products with SOT403-1 package Design support 2020-01-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SO16_SOT109-1_mk plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.35 mm body Marcom graphics 2017-01-28
SSOP16_SOT338-1_mk plastic, shrink small outline package; 16 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body Marcom graphics 2017-01-28
TSSOP16_SOT403-1_mk plastic, thin shrink small outline package; 16 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm body Marcom graphics 2017-01-28
SOT109-1 plastic, small outline package; 16 leads; 1.27 mm pitch; 9.9 mm x 3.9 mm x 1.75 mm body Package information 2023-11-07
SOT338-1 plastic, shrink small outline package; 16 leads; 0.65 mm pitch; 6.2 mm x 5.3 mm x 2 mm body Package information 2022-06-20
SOT403-1 plastic, thin shrink small outline package; 16 leads; 5 mm x 4.4 mm x 1.2 mm body Package information 2023-11-08
SO-SOJ-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
SSOP-TSSOP-VSO-REFLOW Footprint for reflow soldering Reflow soldering 2009-10-08
HCT_USER_GUIDE HC/T User Guide User manual 1997-10-31
SO-SOJ-WAVE Footprint for wave soldering Wave soldering 2009-10-08
WAVE_BG-BD-1 Wave soldering profile Wave soldering 2021-09-08
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
SOT109-1 3D model for products with SOT109-1 package Design support 2020-01-22
SOT403-1 3D model for products with SOT403-1 package Design support 2020-01-22

Ordering, pricing & availability

样品

作为 Nexperia 的客户，您可以通过我们的销售机构订购样品。

如果您没有 Nexperia 的直接账户，我们的全球和地区分销商网络可为您提供 Nexperia 样品支持。查看官方经销商列表。