74AVC16334A

16-bit registered driver with inverted register enable and Dynamic Controlled Outputs; 3‑state

The 74AVC16334A is a 16-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).

This product is designed to have an extremely fast propagation delay and a minimum amount of power consumption.

To ensure the high-impedance state during power up or power down, OE should be tied to V_CC through a pullup resistor (Live Insertion).

A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient.

Wide supply voltage range from 1.2 V to 3.6 V
Complies with JEDEC standards:
- JESD8-7 (1.2 V to 1.95 V)
- JESD8-5 (1.8 V to 2.7 V)
- JESD8-1A (2.7 V to 3.6 V)
CMOS low power consumption
Input/output tolerant up to 3.6 V
Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation
Low inductance multiple V_CC and GND pins to minimize noise and ground bounce
Power off disables 74AVC16334A outputs, permitting Live Insertion
Integrated input diodes to minimize input overshoot and undershoot

文件名称	标题	类型	日期
74AVC16334A	16-bit registered driver with inverted register enable and Dynamic Controlled Outputs; 3-state	Data sheet	2018-09-12
Nexperia_Selection_guide_2023	Nexperia Selection Guide 2023	Selection guide	2023-05-10

如果您需要设计/技术支持，请告知我们并填写应答表, 我们会尽快回复您。