功能框图
Highlighted components are Nexperia focus products
产品
设计考虑因素
- 肖特基整流器或PN整流器，用于感性负载的续流和保护
- 用于开关牵引和保持电流的N沟道MOSFET
电磁阀驱动器
将电能转换为机械能最著名的方法之一就是电磁阀。它们用途广泛，可用于机器人、自动化工厂设备、彩弹枪、电子燃油喷射系统、门铃等应用。例如在门铃中，按下按钮时，电磁阀的磁场便开始移动金属活塞以撞击音调杆。
-
产品
-
应用
- 所有应用
-
汽车
汽车
- Advanced Driver Assistance Systems (ADAS)
ADAS LiDAR systemsADAS front / rear camera systemsADAS radar sensor module - Body Control & Lighting
Adaptive Front LED lightsAutomatic HVAC - BLDC blower motorConstant current source for interior LED lighting - Centralized Architecture
In-Vehicle Network (CAN FD / LIN / FlexRay / Ethernet) protectionZone Control Units (ZCU) - Chassis & Safety
Airbag controller with Safing MOSFETAnti-locking braking systems (ABS/ESC)Electronic (Electric) Power Steering (EPS) - Conventional Powertrain
Cooling FanElectronic Fuel InjectionFluid pump (12 V) - Electrification (xEV powertrain)
48 V Battery Management System (BMS)High-voltage traction inverterInverter for aux. and e-compressorOn-Board Charger (OBC) - Infotainment & Telematics
LED backlight for touchscreens and camerasMultimedia infotainment bus protectionHigh power, high efficiency DC/DC converterStep-down DC/DC converter
- Advanced Driver Assistance Systems (ADAS)
-
工业和电力
- Collaborative robots (cobots)
- Electric forklift truck
- Light Electric Vehicle (LEV)
- Factory Automation and Industry 4.0
- HVAC (Air conditioning)
- 电动自行车
- Fluid Pump Control
- Intelligent outdoor street lighting
- AC EV wallbox
- DC EV charging station
- Hybrid solar inverter
- Micro solar inverter
- Photovoltaic string inverter
- Residential battery energy storage system
- 工业电源(PSU)
- 48/12 V DC/DC转换（电信/服务器）
- 5G宏/微电池电源
- 通信基础设施的热插拔
- UPS Uninterruptible Power Supply
- 12–48 V power tools and cordless equipment
- Electronic shelf label (ESL)
- 供电设备/以太网供电
- 移动和可穿戴应用
-
计算和消费电子
-
Sub-systems: Power conversion topologies
- 子系统
- 参考设计
- 评估板
-
Interactive application notes
- Tutorial
- IAN50001 - Reverse battery protection in automotive applications
- IAN50002 - LED side light SEPIC DC-to-DC converter
- IAN50003 - Driving solenoids in automotive applications
- IAN50004 - Using power MOSFETs in DC motor control applications
- IAN50005 - Paralleling power MOSFETs in high power applications
- IAN50006 - Power MOSFETs in linear mode
- IAN50007 - Conducted battery line transients
- IAN50009 - Power MOSFET applications in automotive BLDC and PMSM drives
- IAN50012 - Nexperia Precision Electrothermal models for Power MOSFETs
- IAN50016 - MOSFETs for airbag applications
- Application notes
- IAN50017 - Multiphase machines for automotive applications
- IAN50019 - Thermal boundary condition study on MOSFET packages and PCB substrates
- IAN50020 - MOSFETs in Power Switch applications
-
Advanced Support Tools
- Interactive Datasheets
- Electrothermal MOSFET models
- Quick Learning Videos
- Interactive applications notes
- MOSFET selector for BLDC Motor (sinusoidal) application
- MOSFET selector for BLDC Motor (trapezoidal) application
- MOSFET selector for Synchronous Boost DC-DC converter application
- MOSFET selector for Synchronous Buck DC-DC converter application
- MOSFET selector for Synchronous SEPIC DC-DC converter application
- Light Energy Harvesting - Energy Balance Calculator
- Nexperia Handbook Library
- Application Guide
- Evaluation Boards
- 质量
- 支持
- 商店
- 工作机会
- 关于我们
- 新闻
- 博客
-