双极性晶体管

二极管

ESD保护、TVS、滤波和信号调节ESD保护

MOSFET

氮化镓场效应晶体管(GaN FET)

绝缘栅双极晶体管(IGBTs)

模拟和逻辑IC

汽车应用认证产品(AEC-Q100/Q101)

NCA9555-Q100

Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output and configuration registers

The NCA9555-Q100 provides 16 bits of General Purpose Input/Output (GPIO) expansion for I²C-bus/SMBus applications. It is designed for a wide voltage range of 1.65 V to 5.5 V with interrupt and default pull-up resistors on GPIOs. Nexperia GPIO expanders provide an elegant solution when additional IOs are needed while keeping the interconnections to a minimum, for example, in ACPI power switches, sensors, push buttons, LEDs and fan control. The NCA9555-Q100 contains a set of 8 bit input, output, configuration and polarity inversion registers. At power up all IOs default to inputs. Each IO can be configured as either input or output by changing the corresponding bit in the configuration register. The data for each input or output is stored in the corresponding input or output register. The polarity inversion register can be programmed to invert the polarity of the input register. The NCA9555-Q100 has an open-drain interrupt output which is activated when any one of the GPIO changes from its corresponding input port register state. The power on reset sets the registers to default values and initializes the device state machine. The NCA9555-Q100 has three address pins A0, A1 and A2 which can be used to configure the I²C bus slave address of the device. It allows up-to eight devices to share the same I²C-bus/SMBus.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +125 °C

  • I²C-bus to parallel port expander

  • Operating power supply voltage range of 1.65 V to 5.5 V

  • Low standby current consumption:

    • 4.0 µA (maximum)

  • Schmitt-trigger action allows slow input transition and better switching noise immunity at the SCL and SDA inputs

    • Vhys = 0.10 × VCC (typical)

    • Noise filter on SCL and SDA inputs

  • 5 V tolerant I/Os

  • 16 I/O pins which power up configured in input state with weak pull-up resistor

  • Open-drain active LOW interrupt output (INT)

  • 400 kHz Fast-mode I²C-bus

  • Internal power-on reset

  • No glitch on power-up

  • Latched outputs with 25 mA drive maximum capability for directly driving LEDs

  • Latch-up performance exceeds 100 mA per JESD78, Class II

  • ESD protection:

    • HBM ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

    • CDM ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

参数类型

型号 VCC (V) Logic switching levels Power dissipation considerations Tamb (°C) Package name
NCA9555BY-Q100 1.65 - 5.5 CMOS low -40~125 HWQFN24
NCA9555PW-Q100 1.65 - 5.5 CMOS low -40~125 TSSOP24

封装

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
NCA9555BY-Q100 NCA9555BY-Q100HP
(935691442128)		 Active NCA9555 SOT8041-1
HWQFN24
(SOT8041-1) 		SOT8041-1 SOT8041-1_128
NCA9555PW-Q100 NCA9555PW-Q100J
(935691448118)		 Active NCA9555PW SOT355-1
TSSOP24
(SOT355-1) 		SOT355-1 SSOP-TSSOP-VSO-WAVE
SOT355-1_118

环境信息

型号 可订购的器件编号 化学成分 RoHS RHF指示符
NCA9555BY-Q100 NCA9555BY-Q100HP NCA9555BY-Q100 rohs rhf rhf
NCA9555PW-Q100 NCA9555PW-Q100J NCA9555PW-Q100 rohs rhf rhf
品质及可靠性免责声明

文档 (12)

文件名称 标题 类型 日期
NCA9555_Q100 Low-voltage 16-bit I²C and SMBus I/O expander with interrupt output and configuration registers Data sheet 2024-08-05
AN90063 Questions about package outline drawings Application note 2025-06-13
SOT355-1 3D model for products with SOT355-1 package Design support 2020-01-22
nca9555 NCA9555 IBIS model IBIS model 2023-01-09
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
SOT8041-1 plastic thermal enhanced very very thin Quad Flat packages, no leads;24 terminals; 0.5 mm pitch; 4 x 4 x 0.75 mm body Package information 2024-04-23
SOT355-1 plastic, thin shrink small outline package; 24 leads; 0.65 mm pitch; 7.8 mm x 4.4 mm x 1.2 mm body Package information 2024-11-15
NCA95XX_Arduino_Sketches NCA95XX Arduino™ Sketch Examples Software 2023-03-12
NCA95XX_EVB_Software NCA95XX EVB GUI Software 2023-03-12
UM90016 NCA95xx GPIO expander EVB (Arduino™ shield compatible) User manual 2024-02-23
UM90017 NCA95XX Evaluation Board: Quick-Start Guide User manual 2023-01-18
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
SOT355-1 3D model for products with SOT355-1 package Design support 2020-01-22
nca9555 NCA9555 IBIS model IBIS model 2023-01-09

Ordering, pricing & availability

样品

作为 Nexperia 的客户，您可以通过我们的销售机构订购样品。

如果您没有 Nexperia 的直接账户，我们的全球和地区分销商网络可为您提供 Nexperia 样品支持。查看官方经销商列表。