Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74AUP1G240GF
Low-power inverting buffer/line driver; 3-state
74AUP1G240提供带3态输出的单路反相缓冲器/线路驱动器。3态输出通过输出使能输入(OE)控制。针脚OE处的高电平使输出呈高阻抗关断状态。
该器件具有输入禁用功能,它允许浮动输入信号。输出使能输入OE为高电平时,输入处于禁用状态。
所有输入处的施密特触发器动作使电路容许整个0.8 V至3.6 V VCC范围内较慢的输入上升和下降时间。
该器件可确保整个0.8 V至3.6 V VCC范围内的极低静态和动态功耗。
该器件完全针对使用IOFF的局部掉电应用设计。IOFF电路可禁用输出,防止掉电时破坏性回流电流通过该器件。
Alternatives
Features and benefits
- 0.8 V至3.6 V的宽电源电压范围
- 高抗噪性
- 符合JEDEC标准:
- JESD8-12(0.8 V至1.3 V)
- JESD8-11(0.9 V至1.65 V)
- JESD8-7(1.2 V至1.95 V)
- JESD8-5(1.8 V至2.7 V)
- JESD8-B(2.7 V至3.6 V)
- ESD保护:
- HBM JESD22-A114F超过5000 V
- MM JESD22-A115-A超过200 V
- CDM JESD22-C101E超过1000 V
- 低静态功耗;ICC = 0.9 µA(最大)
- 闭锁性能超过100 mA,符合JESD 78 II类标准
- 输入可接受高达3.6 V的电压
- 低噪声过冲和欠冲,小于VCC的10 %
- 输入禁用特性允许浮空输入条件
- IOFF电路提供局部掉电模式操作
- 多种封装选择
- 额定温度范围为–40 °C至+85 °C和–40 °C至+125 °C
参数类型
型号 | Product status | Package name |
---|---|---|
74AUP1G240GF | End of life | XSON6 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74AUP1G240GF | 74AUP1G240GF,132 (935281123132) |
Obsolete | no package information |
Series
文档 (5)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
74AUP1G240 | Low-power inverting buffer/line driver; 3-state | Data sheet | 2023-07-18 |
AN10161 | PicoGate Logic footprints | Application note | 2002-10-29 |
AN11052 | Pin FMEA for AUP family | Application note | 2019-01-09 |
aup1g240 | 74AUP1G240 IBIS model | IBIS model | 2014-12-14 |
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904 | Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904 | Leaflet | 2019-04-12 |
支持
如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。
模型
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
aup1g240 | 74AUP1G240 IBIS model | IBIS model | 2014-12-14 |
PCB Symbol, Footprint and 3D Model
Model Name | 描述 |
---|---|
|
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.