Register once, drag and drop ECAD models into your CAD tool and speed up your design.

Click here for more information

74AHCT123ABQ ECAD models PCB Symbol, Footprint & ECAD Model

Dual retriggerable monostable multivibrator with reset

The 74AHC123A; 74AHCT123A are high-speed Si-gate CMOS devices and are pin compatible with Low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.

The 74AHC123A; 74AHCT123A are dual retriggerable monostable multivibrators with output pulse width control by three methods. The basic pulse time is programmed by selection of an external resistor (REXT) and capacitor (CEXT).

Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (nA) or the active HIGH-going edge input (nB). By repeating this process, the output pulse period (nQ = HIGH, nQ = LOW) can be made as long as desired. Alternatively an output delay can be terminated at any time by a LOW-going edge on input nRD, which also inhibits the triggering.

An internal connection from nRD to the input gate makes it possible to trigger the circuit by a positive-going signal at input nRD. The basic output pulse width is essentially determined by the value of the external timing components REXT and CEXT. When CEXT ≥ 10 nF, the typical output pulse width is defined as: tW= REXT× CEXT where tW= pulse width in ns; REXT= external resistor in kΩ; CEXT= external capacitor in pF. Schmitt-trigger action at all inputs makes the circuit highly tolerant to slower input rise and fall times.


型号 可订购的器件编号 订购代码(12NC) 封装 从经销商处购买
74AHCT123ABQ 74AHCT123ABQ,115 935285425115 SOT763-1 订单产品


  • All inputs have a Schmitt-trigger action
  • Inputs accept voltages higher than VCC
  • DC triggered from active HIGH or active LOW inputs
  • Retriggerable for very long pulses up to 100 % duty factor
  • Direct reset terminates output pulse
  • For 74AHC123A only: operates with CMOS input levels
  • For 74AHCT123A only: operates with TTL input levels
  • ESD protection:
    • HBM JESD22-A114E exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V
    • CDM JESD22-C101C exceeds 1000 V
  • Multiple package options
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C



型号Product statusVCC (V)Logic switching levelsOutput drive capability (mA)tpd (ns)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74AHCT123ABQProduction4.5 - 5.5TTL± 85.0low-40~1259414.463DHVQFN16


( 9352 854 25115 )
SOT763-1Reel 7" Q1/T1


型号可订购的器件编号化学成分RoHS / RHFEFRIFRMTBF(小时)MSLMSL无铅

文档 (5)

74AHC_AHCT123ADual retriggerable monostable multivibrator with resetData sheet2017-05-04
AN11106Pin FMEA for AHC/AHCT familyApplication note2019-01-09
ahct123aahct123a IBIS modelIBIS model2013-04-08
SOT763-1_115DHVQFN16; Reel pack, SMD, 7" Q1/T1 product orientationPacking2020-02-13
SOT763-1plastic, leadless dual in-line compatible thermal enhanced very thin quad flat package; 16 terminals; 0.5 mm pitch; 3.5 mm x 2.5 mm x 1 mm bodyOutline drawing2018-11-14


如果您需要设计/技术支持,请告知我们并填写 应答表, 我们会尽快回复您。


ahct123aahct123a IBIS modelIBIS model2013-04-08


型号Orderable part numberOrdering code (12NC)包装在线购买
74AHCT123ABQ74AHCT123ABQ,115935285425115Reel 7" Q1/T1订单产品