×

NXS0104PW-Q100

Dual supply translating transceiver; open drain; auto direction sensing

The NXS0104-Q100 is a 4-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 4-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at any voltage between 1.65 V and 3.6 V and VCC(B) can be supplied at any voltage between 2.3 V and 5.5 V, making the device suitable for translating between any of the voltage nodes (1.8 V, 2.5 V, 3.3 V and 5.0 V). Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)

    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C

  • Wide supply voltage range:

    • VCC(A): 1.65 V to 3.6 V and VCC(B): 2.3 V to 5.5 V

  • Maximum data rates:

    • Push-pull: 24 Mbps

  • IOFF circuitry provides partial Power-down mode operation

  • Inputs accept voltages up to 5.5 V

  • ESD protection:

    • HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2.5 kV for A port

    • HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15 kV for B port

    • MIL-STD-883, method 3015 Class 2 exceeds 2.5 kV for A port

    • MIL-STD-883, method 3015 Class 3B exceeds 15 kV for B port

    • IEC61000-4-2 contact discharge exceeds 8000 V for B port

  • Latch-up performance exceeds 100 mA per JESD 78B Class II

  • Multiple package options

  • DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of solder joints

参数类型

型号 Product status VCC(A) (V) VCC(B) (V) Logic switching levels Output drive capability (mA) tpd (ns) Nr of bits Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
NXS0104PW-Q100 Production 1.65 - 3.6 2.3 - 5.5 CMOS -0.02 6 4 low -40~125 133 4.9 58 TSSOP14

PCB Symbol, Footprint and 3D Model

Model Name 描述

封装

型号 可订购的器件编号,(订购码(12NC)) 状态 标示 封装 外形图 回流焊/波峰焊 包装
NXS0104PW-Q100 NXS0104PW-Q100J
(935690809118)
Active NXS0104 SOT402-1
TSSOP14
(SOT402-1)
SOT402-1 SSOP-TSSOP-VSO-WAVE
SOT402-1_118

环境信息

型号 可订购的器件编号 化学成分 RoHS RHF指示符
NXS0104PW-Q100 NXS0104PW-Q100J NXS0104PW-Q100 rohs rhf rhf
品质及可靠性免责声明

文档 (14)

文件名称 标题 类型 日期
NXS0104_Q100 Dual supply translating transceiver; open drain; auto direction sensing Data sheet 2022-05-02
AN90014 Pin FMEA for NXS family Application note 2020-03-25
nxs0104 NXS0104 IBIS model IBIS model 2020-11-05
NXS0104PW-Q100_Nexperia_Product_Reliability NXS0104PW-Q100 Nexperia Product Reliability Quality document 2023-05-29
SOT402-1 3D model for products with SOT402-1 package Design support 2023-02-02
SOT402 3D model for products with SOT402 package Design support 2020-01-22
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
TSSOP14_SOT402-1_mk plastic, thin shrink small outline package; 14 leads; 0.65 mm pitch; 5 mm x 4.4 mm x 1.1 mm body Marcom graphics 2017-01-28
SOT402-1_118 TSSOP14; Reel pack for SMD, 13"; Q1/T1 product orientation Packing information 2020-04-21
SOT402-1_623 TSSOP14; Reel pack; SMD, 13"; Q1 Standard product orientation; Orderable part number ending, 623 or XP; Ordering code (12NC) ending 623 Packing information 2020-04-27
SOT402-1_653 TSSOP14; Reel pack; SMD, 13"; Q1 Standard product orientation; Orderable part number ending, 653 or HL; Ordering code (12NC) ending 653 Packing information 2020-04-27
SSOP-TSSOP-VSO-WAVE Footprint for wave soldering Wave soldering 2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
nxs0104 NXS0104 IBIS model IBIS model 2020-11-05
SOT402-1 3D model for products with SOT402-1 package Design support 2023-02-02
SOT402 3D model for products with SOT402 package Design support 2020-01-22

PCB Symbol, Footprint and 3D Model

Model Name 描述

订购、定价与供货

型号 Orderable part number Ordering code (12NC) 状态 包装 Packing Quantity 在线购买
NXS0104PW-Q100 NXS0104PW-Q100J 935690809118 Active SOT402-1_118 2,500 订单产品

样品

安世半导体客户可通过我们的销售机构或直接通过在线样品商店订购样品: https://extranet.nexperia.com.

样品订单通常需要2-4天寄送时间。

如果您尚未取得安世半导体的直接采购帐号,我们的全球与区域经销网络可以协助您取得样品。

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

可订购部件

型号 可订购的器件编号 订购代码(12NC) 封装 从经销商处购买
NXS0104PW-Q100 NXS0104PW-Q100J 935690809118 SOT402-1 订单产品