Register once, drag and drop ECAD models into your CAD tool and speed up your design.
Click here for more information74LVC2G240GM
Dual inverting buffer/line driver; 3-state
74LVC2G240是带3态输出的双路反相缓冲器/线路驱动器。3态输出通过输出使能输入1OE和2OE控制。针脚nOE处的高电平使输出呈高阻抗关断状态。所有输入处的施密特触发器动作使电路高度容许较慢的输入上升和下降时间。
输入可通过3.3 V或5 V器件进行驱动。该特性允许在混合3.3 V和5 V环境中将74LVC2G240用作转换器。
其完全适合使用IOFF的局部掉电应用。IOFF电路可禁用输出,防止掉电时破坏性回流电流通过该器件。
Alternatives
Features and benefits
- 1.65 V至5.5 V的宽电源电压范围
- 5 V容压输入/输出,可实现与5 V逻辑的接合
- 高抗噪性
- 符合JEDEC标准:
- JESD8-7(1.65 V至1.95 V)
- JESD8-5(2.3 V至2.7 V)
- JESD8-B/JESD36(2.7 V至3.6 V)
- ESD保护:
- HBM JESD22-A114F超过2000 V
- MM JESD22-A115-A超过200 V
- ±24 mA输出驱动(VCC = 3.0 V)
- CMOS低功耗
- 闭锁性能超过250 mA
- 具有TTL电平的直接接口
- 输入可接受高达5 V的电压
- 多种封装选择
- 额定温度范围为–40 °C至+85 °C和–40 °C至+125 °C
参数类型
型号 | Product status | Package name |
---|---|---|
74LVC2G240GM | End of life | XQFN8 |
封装
下表中的所有产品型号已停产。参见表 停产信息 了解更多信息。
型号 | 可订购的器件编号,(订购码(12NC)) | 状态 | 标示 | 封装 | 外形图 | 回流焊/波峰焊 | 包装 |
---|---|---|---|---|---|---|---|
74LVC2G240GM | 74LVC2G240GM,125 (935282651125) |
Obsolete | V40 |
XQFN8 (SOT902-2) |
SOT902-2 | SOT902-2_125 |
Series
文档 (8)
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
74LVC2G240 | Dual inverting buffer/line driver; 3-state | Data sheet | 2023-08-21 |
AN10161 | PicoGate Logic footprints | Application note | 2002-10-29 |
AN11009 | Pin FMEA for LVC family | Application note | 2019-01-09 |
Nexperia_document_guide_MiniLogic_MicroPak_201808 | MicroPak leadless logic portfolio guide | Brochure | 2018-09-03 |
lvc2g240 | 74LVC2G240 IBIS model | IBIS model | 2014-10-20 |
Nexperia_package_poster | Nexperia package poster | Leaflet | 2020-05-15 |
XQFN8_SOT902-2_mk | plastic, extremely thin quad flat package; 8 terminals; 0.55 mm pitch; 1.6 mm x 1.6 mm x 0.5 mm body | Marcom graphics | 2017-01-28 |
SOT902-2 | plastic, leadless extremely thin quad flat package; 8 terminals; 0.5 mm pitch; 1.6 mm x 1.6 mm x 0.5 mm body | Package information | 2020-04-21 |
支持
如果您需要设计/技术支持,请告知我们并填写 应答表 我们会尽快回复您。
模型
文件名称 | 标题 | 类型 | 日期 |
---|---|---|---|
lvc2g240 | 74LVC2G240 IBIS model | IBIS model | 2014-10-20 |
How does it work?
The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.