Nexperia
Or cross multiple parts
×

74AVC16374DGG-Q100

16-bit edge triggered D-type flip-flop; 3.6 V tolerant; 3-state

The 74AVC16374-Q100 is a 16-bit edge triggered flip-flop featuring separate D-type inputs for each flip-flop and 3-state outputs for bus-oriented applications. The 74AVC16374-Q100 consist of 2 sections of 8 edge-triggered flip-flops. A clock input (CP) and an output enable (OE) are provided per 8-bit section.

The 74AVC16374-Q100 is designed to have an extremely fast propagation delay and a minimum amount of power consumption.

To ensure the high-impedance output state during power-up or power-down, nOE should be tied to VCC through a pull-up resistor (Live Insertion).

A Dynamic Controlled Output (DCO) circuitry is implemented to support termination line drive during transient.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 3) and is suitable for use in automotive applications.

此产品已停产

Features and benefits

  • Automotive product qualification in accordance with AEC-Q100 (Grade 3)

    • Specified from -40 °C to +85 °C

  • Wide supply voltage range from 1.2 V to 3.6 V

  • Complies with JEDEC standards:

    • JESD8-7 (1.2 V to 1.95 V)

    • JESD8-5 (1.8 V to 2.7 V)

    • JESD8-1A (2.7 V to 3.6 V)

  • ESD protection:

    • MIL-STD-883, method 3015 exceeds 1000 V

    • HBM JESD22-A114F exceeds 1000 V

    • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

  • CMOS low power consumption

  • Input/output tolerant up to 3.6 V

  • Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation

  • Low inductance multiple VCC and GND pins to minimize noise and ground bounce

  • Supports Live Insertion

Applications

参数类型

型号 Product status VCC (V) Logic switching levels Output drive capability (mA) tpd (ns) fmax (MHz) Power dissipation considerations Tamb (°C) Rth(j-a) (K/W) Ψth(j-top) (K/W) Rth(j-c) (K/W) Package name
74AVC16374DGG-Q100 End of life 1.2 - 3.6 CMOS ± 12 1.5 350 low -40~85 82 2.0 37 TSSOP48

封装

下表中的所有产品型号均已停产 。

型号 可订购的器件编号，（订购码(12NC)） 状态 标示 封装 外形图 回流焊/波峰焊 包装
74AVC16374DGG-Q100 74AVC16374DGG-Q10J
(935301543118)		 Obsolete no package information

环境信息

下表中的所有产品型号均已停产 。

型号 可订购的器件编号 化学成分 RoHS RHF指示符
74AVC16374DGG-Q100 74AVC16374DGG-Q10J 74AVC16374DGG-Q100 rohs rhf rhf
品质及可靠性免责声明

Series

文档 (3)

文件名称 标题 类型 日期
74AVC16374_Q100 16-bit edge triggered D-type flip-flop; 3.6 V tolerant; 3-state Data sheet 2017-03-30
AN90007 Pin FMEA for AVC family Application note 2018-11-30
avc16374 74AVC16374 IBIS model IBIS model 2019-01-09

支持

如果您需要设计/技术支持，请告知我们并填写 应答表 我们会尽快回复您。

模型

文件名称 标题 类型 日期
avc16374 74AVC16374 IBIS model IBIS model 2019-01-09

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式数据手册