HEF4104BT-Q100

The HEF4104B-Q100 is a quad low voltage-to-high voltage translator with 3-state outputs. It provides the capability of interfacing low voltage circuits to high-voltage circuits. For example, low voltage Local Oxidation Complementary MOS (LOCMOS) and Transistor-Transistor Logic (TTL) to high-voltage LOCMOS. It has four data inputs (A0 to A3) and an active HIGH output enable input (OE). It also has four data outputs (B0 to B3) with their complements (B0 to B3).

With OE = HIGH, the outputs B0 to B3 and B0 to B3 are in the low impedance ON-state. The inputs A0 to A3 determine whether it is HIGH or LOW. With OE = LOW, the outputs B0 to B3 and B0 to B3 are in the high-impedance OFF-state.

It uses a common negative supply (V_SS) and separate positive supplies for the inputs (V_DD(A)) and the outputs (V_DD(B)). V_DD(A) must always be less than or equal to V_DD(B), even during power turn-on and turn-off.

Each input protection circuit is terminated between V_DD(B) and V_SS. It allows the input signals to be driven from any potential between V_DD(B) and V_SS, without regard to current limiting. When driving from potentials greater than V_DD(B) or less than V_SS, the current at each input must be limited to 10 mA.

It operates over a recommended V_DD power supply range of 3 V to 15 V referenced to V_SS (usually ground). Unused inputs must be connected to V_DD, V_SS, or another input.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 3) and is suitable for use in automotive applications.