×

Register once, drag and drop ECAD models into your CAD tool and speed up your design.

Click here for more information

74HCT193PW-Q100

Presettable synchronous 4-bit binary up/down counter

The 74HC193-Q100; 74HCT193-Q100 is a 4-bit synchronous binary up/down counter. Separate up/down clocks, CPU and CPD respectively, simplify operation. The outputs change state synchronously with the LOW-to-HIGH transition of either clock input. If the CPU clock is pulsed while CPD is held HIGH, the device counts up. If the CPD clock is pulsed while CPU is held HIGH, the device counts down. Only one clock input can be held HIGH at any time to guarantee predictable behavior. The device can be cleared at any time by the asynchronous master reset input (MR). It may also be loaded in parallel by activating the asynchronous parallel load input (PL). The terminal count up (TCU) and terminal count down (TCD) outputs are normally HIGH. When the circuit has reached the maximum count state of 15, the next HIGH-to-LOW transition of CPU causes TCU to go LOW. TCU remains LOW until CPU goes HIGH again, duplicating the count up clock. Likewise, the TCD output goes LOW when the circuit is in the zero state and the CPD goes LOW. The terminal count outputs duplicate the clock waveforms and can be used as the clock input signals to the next higher-order circuit in a multistage counter. Multistage counters are not fully synchronous, since there is a slight delay time difference added for each stage that is added. The counter may be preset by the asynchronous parallel load capability of the circuit. Information on the parallel data inputs (D0 to D3), is loaded into the counter. This information appears on the outputs (Q0 to Q3) regardless of the conditions of the clock inputs when the parallel load (PL) input is LOW. A HIGH level on the master reset (MR) input disables the parallel load gates. It overrides both clock inputs and sets all outputs (Q0 to Q3) LOW. If one of the clock inputs is LOW during and after a reset or load operation, the next LOW-to-HIGH transition of that clock is interpreted as a legitimate signal and it is counted. Inputs include clamp diodes that enable the use of current limiting resistors to interface inputs to voltages in excess of VCC.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

可订购部件

型号 可订购的器件编号 订购代码(12NC) 封装 从经销商处购买
74HCT193PW-Q100 74HCT193PW-Q100J 935300452118 SOT403-1 订单产品

特性

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1)
    • Specified from -40 °C to +85 °C and from -40 °C to +125 °C
  • Wide supply voltage range from 2.0 to 6.0 V
  • CMOS low power dissipation
  • High noise immunity
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
  • Input levels:
    • For 74HC193-Q100: CMOS level
    • For 74HCT193-Q100: TTL level
  • Synchronous reversible 4-bit binary counting
  • Asynchronous parallel load
  • Asynchronous reset
  • Expandable without external logic
  • Complies with JEDEC standards:
    • JESD8C (2.7 V to 3.6 V)
    • JESD7A (2.0 V to 6.0 V)
  • ESD protection:
    • MIL-STD-883, method 3015 exceeds 2000 V
    • HBM JESD22-A114F exceeds 2000 V
    • MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 Ω)

目标应用

参数类型

型号Product statusVCC (V)Output drive capability (mA)Logic switching levelstpd (ns)fmax (MHz)Power dissipation considerationsTamb (°C)Rth(j-a) (K/W)Ψth(j-top) (K/W)Rth(j-c) (K/W)Package name
74HCT193PW-Q100Production4.5 - 5.5± 4TTL2043low-40~1251011.027TSSOP16

Package

型号可订购的器件编号,(订购码(12NC))状态标示封装尺寸版本回流焊/波峰焊包装
74HCT193PW-Q10074HCT193PW-Q100J
( 9353 004 52118 )
ActiveHCT193
TSSOP16
(SOT403-1)
SOT403-1SSOP-TSSOP-VSO-WAVE
Reel 13" Q1/T1

品质、可靠性及化学成分

型号可订购的器件编号化学成分RoHS / RHFEFRIFRMTBF(小时)MSLMSL无铅
74HCT193PW-Q10074HCT193PW-Q100J74HCT193PW-Q10039.31.37.69E811
品质及可靠性免责声明

文档 (4)

文件名称标题类型日期
74HC_HCT193_Q100Presettable synchronous 4-bit binary up/down counterData sheet2021-09-08
AN11044Pin FMEA 74HC/74HCT familyApplication note2019-01-09
HCT_USER_GUIDEHC/T User GuideUser manual1997-10-31
SSOP-TSSOP-VSO-WAVEFootprint for wave solderingWave soldering2009-10-08

支持

如果您需要设计/技术支持,请告知我们并填写 应答表, 我们会尽快回复您。

订购、定价与供货

型号Orderable part numberOrdering code (12NC)包装在线购买
74HCT193PW-Q10074HCT193PW-Q100J935300452118Reel 13" Q1/T1订单产品

样品

安世半导体客户可通过我们的销售机构或直接通过在线样品商店订购样品: https://extranet.nexperia.com.

样品订单通常需要2-4天寄送时间。

如果您尚未取得安世半导体的直接采购帐号,我们的全球与区域经销网络可以协助您取得样品。